Day Night CO2 Monitor & Controller for Greenhouses Day Night CO2 Monitor & Controller for Greenhouses Day Night CO2 Monitor & Controller for Greenhouses
Click to enlarge.
Contact us for Pricing

Browse more CO2 Monitor or additional CO2Meter products.

(Or go back to the Fixed and Wall Mount collection page.)

Manual Storage Safety Alarm Data Sheet (pdf)

Manual Storage Safety Alarm Manual (pdf)

Videos

Video Change the default SetPoint

RAD-0501

This Day/Night CO2 Controller can be used in greenhouses, hydroponics rooms and other places where elevated carbon dioxide levels are used to maximize plant growth.

Accurate CO2 Generator Control
Photo Sensor Turns off CO2 at Night
Easy Fresh-Air Calibration
The Day/Night CO2 Monitor & Controller lets you set the maximum carbon dioxide levels. When the minimum level is sensed, power is supplied to a CO2 generator or regulator via the built-in 110-240 VAC 5A piggyback power cord. When the desired maximum level is reached, the power is turned off.

In addition, the CO2 Monitor & Controller has a built-in photo sensor that overrides the CO2 control and shuts off the CO2 when it senses darkness. Photo sensor control saves dollars and energy by insuring you’ll only be supplying CO2 during the light cycle when it is needed.

Best of all, the CO2 Monitor & Controller is easy to install and use. Simply mount the unit inside your greenhouse, (all cables and hardware included), plug it into a standard wall jack, plug in your CO2 generator or regulator and it is ready to maximize your plant growing yields.

See our CO2 Tank Regulator with Solenoid Valve here.

Features

Large digital LCD display clearly indicates the current CO2 level and temperature
Easy to read display with all functions set from 3 push buttons
Power, upper limit, lower limit and photo sensor verification LEDs
Non-UV Emitting LED's - no interference with the grow cycle
IP54 Enclosure - cover during cleaning, fertilization, or washdown
Specifications

Measurement Range: 0-10,000ppm
NDIR CO2 Sensing Technology
Accuracy: ± 70ppm or ± 5% CO2
Sensor Response Time: < 2 minutes
Operating Temperature: 32° to 122° F
Calibration: In-situ with fresh air
Sensor Life Expectancy: 15 years
Relay: One Relay output, Peak Current < 5A@ 250 VAC, SPST. Normally Open.
Electrical

Power: 110VAC Grounded US Plug Only
Power Consumption:2 Watts Maximum
Piggyback Cable: Peak Current < 5A @ 250 VAC
Default settings: 1,000 ppm CO2 power off, 900 ppm power on
Options

CO2 Tank Regulator with Solenoid Valve
Warranty

1 Year

• 
  Manual-RAD-0501-CO2-Monitor-Controller.pdf
  187 KB
  United States
• 
  DS-RAD-0501-CO2-Controller-Greenhouse.pdf
  153 KB
  United States