Overview
Specifically designed for Floating Roof Tanks (Internal and External roofs) with Flexible Sensing Element 700-0005-594

Field Adjustable lengths from 1' to 18' (0.3 to 5.48 m) 12" to 216" (305mm to 5486 mm)
Wetted Parts: 316SS 3/4" NPT Mounting, 3/16" FEP insulated flexible and adjustable cable, Non-Sparking Brass Sensor.
Features:

Alarm trip points with any contact of internal or external roof.
Alarm trip points in "Sunken Roof" applications with less than 1" product.
One system will fit most floating roof tank application needs, reducing field spares.
Intelligent Electronics

Meets API 2350 regulations.
For use in safety related systems with requirements for functional safety for SIL2 (SIL 3 with Redundant Switch) In accordance to IEC61508-2, Sec. 7.4.3.1 1999 (Conforms to SIL, FMEDA Requirements - Exida)
No calibration or setpoint adjustments.
Automatically recognizes and ignores coatings to prevent false alarms.
Continuous Self-Test monitors circuits and sensing elements for faults
Remote or Integral Electronics
Dual Compartment Housing
The dual compartment housing separates the customer wiring from the sensing element and operating circuits. The encapsulated power supply/terminal block design eliminates the� possibility of damage caused by moisture in the conduit.

Self-Test Feature
Automatic and Local or Remote Manual test functions ensure proper system operation.

Auto Verification
Each IntelliPoint is supplied with a continuous self-test feature that constantly monitors the integrity of not just the electronics, but the sensing element and interconnecting cable. If a fault is detected, the IntelliPoint Auto Verification feature alerts plant personnel.

Manual Certification
The IntelliPoint provides a method to manually test the entire system without removing the sensor from the tank. The Manual Certify Test checks that the Auto Verify circuits are operating and confirms the probe and cables are properly connected. The Manual Certify also allows the IntelliPoint electronics to sense changes in the probe that simulate contact with the media or a floating roof. This provides the user with a method to insure working performance without having to climb the tank. At the completion of the Certify test routine, the output is momentarily held in the alarm state so personnel can confirm that the control circuits connected to the Final Control Element are functioning properly.




Specs



Technology:
RF Admittance

Calibration:
None

Modes Of Operation:
High and Low Level

Repeatability:
2 mm (0.08 inch) conductive liquids

Response Time:
Less than one second

Ambient Elctronic Temperature:
-40 to 70°C (-40 to 158°F)

Storage Temperature:
-40 to 85°C (-40 to 185°F)

Indicators:
LEDs: Green Power, Red Alarm

Self-Check:
AutoVerify automatically and continuously checks electronics and sensing element for faults. Manual Certify checks that the AutoVerify circuits are functioning.

Time Delay:
0-60 seconds, forward or reverse-acting

Supply Voltage:
13-30 Vdc

Power Consumption:
2 watts maximum

Output:
8mA - Alarm 8mA - Normal
16mA - Normal 16mA - Alarm
22mA - Fault 5mA - Fault

Housing:
Dual Compartment, Powder- Coated aluminum with two cable entries

Cable Entry:
M20 x 1.5 CENELEC
3/4-inch NPT FM/CSA

Ingress Protection:
IP66 NEMA 4X

• 
  SXRLTX-A.pdf
  2 KB
  United States