The Model Cg pilot plant can be setup to test a variety of membrane pore sizes, operating parameters (pressure, transmembrane pressure, cross-flow rate, temperature, backpulsing, etc.), and feed channel diameters (3mm, 4mm, and 6mm) to achieve optimal performance.
The ceramic membranes are available in a range of pore sizes or molecular weight cutoffs (MWCO): Membrane Filtration/Ultra Filtration membranes from 5 micron to 0.02 micron; Ultra Filtration /Nano Filtration membranes of 5,000 and 1,000 MWCO.
The pilot plant can be operated in: batch mode, semi-batch mode, or feed and bleed mode. The pilot plant design has a single stage recirculation loop.
The Model C membrane filtration pilot plant is skid mounted and will be delivered with all the components required for quick installation and easy operation, including an operating manual with data sheet templates.
Standard Features
-
One, tubular ceramic membrane module
-
50 gallon feed tank
-
Control loops (temperature and tank level)
-
Feed and recirculation pumps
-
Motor starters
-
Permeate and concentrate flow indicators
-
Heat exchanger
-
Temperature and pressure gauges
-
316L stainless steel construction
-
Skid mounted
Optional Features
-
UF/NF membrane modules
-
300 psig operating capability
-
Pretreatment equipment
-
screens and depth filters
-
chemical feed systems
-
Backpulse device
Operating Conditions
Membrane Area:
|
3.6 to 6.7 m2
|
Permeate Capacity:
|
100 - 500 gallons/hour
|
Pressure:
|
up to 100 psig
|
Temperature:
|
up to 200° F
|
Utility Requirements
Power:
|
230/460V, 3phase, 60Hz
|
Electric Service:
|
60 amps / 460 V
|
Plant Air:
|
80 psig, oil-free
|
Plant Air Line:
|
3/8"
|
Cooling Water:
|
15 gpm, 60° F
|
CIP Water:
|
25 gpm
|
Seal Water:
|
1 gpm
|