The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with several individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – up to 116 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product




The hose element is critical to ensure pump performance, durability and efficiency. Bredel compositereinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 232 psi
Repeatable volumetric accuracy to ± 1%
Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent chemical resistance, especially to ketones, alcohols and concentrated acids.

EPDM

Max. fluid temperature: 194 F
Min. fluid temperature: 14 F




The hose element is critical to ensure pump performance, durability and efficiency. Bredel APEX composite reinforced machined hoses are constructed from high-quality compounded rubbers reinforced with several individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained. APEX EPDM hoses are available for APEX 10/15/20 pumps only.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

APEX EPDM hoseKey features of Bredel APEX hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 116 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Perfect compression for long life
Exceptional performance when handling high viscosity product


APEX EPDM hoseExcellent chemical resistance, especially to ketones, alcohols and concentrated acids.

Max. fluid temperature: 194 F
Min. fluid temperature: 14 F







The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 232 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Outstanding abrasion resistance. Generally resistant to diluted acids and alcohols.

Natural rubber

Max. fluid temperature: 176 F
Min. fluid temperature: -4 F



The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

APEX NR hoseKey features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 232 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product


APEX hose NR 100pxOutstanding abrasion resistance. Generally resistant to diluted acids and alcohols.

Max. fluid temperature: 176 F
Min. fluid temperature: -4 F





The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with up to four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – up to 232 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Resistant to oils, greases, alkalis and detergents.

Buna N

Max. fluid temperature: 176 F
Min. fluid temperature: 14 F



The hose element is critical to ensure pump performance, durability and efficiency. Bredel APEX composite reinforced machined hoses are constructed from high-quality compounded rubbers reinforced with several individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

APEX NBR hoseKey features of Bredel APEX hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 116 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product


Resistant to oils, greases, alkalis and detergents.

i-apexhose-10NBR-100px

Max. fluid temperature: 176 F
Min. fluid temperature: 14 F



Maximum uptime, 80% longer hose life
Meets FDA21CFR177.2600, EC 1935/2004 and BfR XX1
100% traceability and quality control throughout the supply chain
Manufactured according to cGMP (EC 2023/2006)
Delivered pre-cleaned and individually packaged
Reduced maintenance
Can be CIP/SIP cleaned
The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compound rubbers reinforced with up to four individual layers of braided nylon, and finished by high-precision machining. White inner layer suitable for food contact. Outer layers are machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 9.5m (30ft) suction lift
High pressure capability – 16 bar (231 psi)
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Suitable for all food products including oils and greases. Meets FDA, EC, EHEDG and 3A standards.

Max. fluid temperature: 176 F
Min. fluid temperature: 14 F





Suitable for all food products including oils and greases. Meets EC and EHEDG  standards. Available for APEX 10/15/20 pumps only.

Max. fluid temperature: 80C
Min. fluid temperature: -10C




The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 232 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Outstanding resistance to strong, oxidising products and concentrated acids and bases.

Hypalon

Max. fluid temperature: 176 F
Min. fluid temperature: 14 F




The hose element is critical to ensure pump performance, durability and efficiency. Bredel APEX composite reinforced machined hoses are constructed from high-quality compounded rubbers reinforced with several individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained. APEX CSM hoses are available for APEX 10/15/20 pumps only.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

APEX CSM hoseKey features of Bredel APEX hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 116 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Outstanding resistance to strong, oxidising products and concentrated acids and bases.

APEX hose CSM 100px

Max. fluid temperature: 176 F
Min. fluid temperature: 14 F




The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained.

Perfect 100% compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Key features of Bredel hose elements include:

Tight tolerances for low stress on bearings
Perfect compression for long life
Excellent suction performance – 30ft suction lift
High pressure capability – 232 psi
Repeatable volumetric accuracy to ± 1%
Consistent capacity independent of varying suction and discharge conditions
Exceptional performance when handling high viscosity product
Meets FDA standards, resistant to alcohols, acids and oxidising products.

Bioprene

Max. fluid temperature: 140 F
Min. fluid temperature: 32 F